Garage Door Opener Guide
Chamberlain RJO101 Review & Installation Guide
The Chamberlain RJO101 is a wall-mount jackshaft opener with built-in myQ Wi-Fi and battery backup. Here is everything Surrey homeowners need to know before buying or having one installed.
What Is the Chamberlain RJO101?
The Chamberlain RJO101 is a wall-mount (jackshaft) garage door opener that mounts beside the door on the wall rather than on a ceiling rail. This makes it ideal for garages with low headroom, high-lift door tracks, or cathedral ceilings where a standard ceiling-mount opener cannot be installed. It drives the door by turning the torsion spring shaft directly, eliminating the need for a rail and trolley system. The RJO101 includes built-in myQ Wi-Fi, battery backup, and is compatible with Chamberlain's full range of remotes and keypads. Surrey Doors Ltd. installs and services the RJO101 throughout Surrey.
Chamberlain RJO101 — Pros and Cons
Pros
- Wall-mount design frees up ceiling space — ideal for storage lifts, car lifts, or low-headroom garages
- Compatible with high-lift and vertical-lift door tracks where ceiling-mount openers cannot be used
- Built-in myQ Wi-Fi — no separate hub required
- Battery backup included as standard
- Very quiet operation — no rail vibration transmitted to the ceiling
- Lifetime motor warranty
Cons
- Requires a torsion spring system — not compatible with extension spring doors
- Higher installed cost than ceiling-mount belt-drive openers
- Installation is more complex — requires a qualified technician familiar with jackshaft systems
- No built-in camera (unlike the LiftMaster 98022)
Chamberlain RJO101 Installation in Surrey
The RJO101 mounts on the wall beside the door and connects directly to the torsion spring shaft. Installation requires a properly tensioned torsion spring system — the opener does not work with extension springs. Surrey Doors Ltd. confirms spring compatibility and condition before every RJO101 installation.
Spring and shaft inspection
We confirm the door has a torsion spring system and that the spring is in good condition. A worn or improperly tensioned spring will cause the RJO101 to struggle or fail prematurely.
Wall bracket mounting
The mounting bracket is secured to the wall beside the door at the correct height relative to the torsion shaft. Correct positioning is critical for the drive gear to engage the shaft properly.
Drive gear engagement
The opener is mounted on the bracket and the drive gear is engaged with the torsion shaft. We confirm the gear is fully seated and the shaft turns freely.
Limit and force calibration
Open and close limits are set so the door fully opens and closes without over-travel. Force settings are calibrated to the door weight.
Safety reversal test
We test the auto-reverse function with a 2x4 on the floor and confirm the photo-eye beam interruption reversal is working correctly.
myQ app setup
We connect the opener to your home Wi-Fi and walk you through the myQ app setup, including notification preferences.
Setting Up myQ on the Chamberlain RJO101
The RJO101 uses the same myQ platform as LiftMaster openers. Setup is identical to the LiftMaster 98022.
Download the myQ app
Available free on iOS and Android. Create a myQ account or sign in.
Add a device
Tap the + icon and select Garage Door Opener. The app pairs via Bluetooth during initial setup.
Connect to Wi-Fi
Enter your home Wi-Fi password. The RJO101 supports 2.4 GHz and 5 GHz networks.
Name the device and set notifications
Name the opener and configure open/close alerts and closing reminders.
The RJO101 and LiftMaster 98022 share the same myQ account — if you have both brands, they appear in the same app.
Compatibility checked: October 2026. myQ smartphone control is built into the RJO101. Third-party platform integrations change over time — verify current support at myq.com/partners before purchase. View current myQ partner integrations →
Chamberlain RJO101 Troubleshooting
Opener hums but door does not move
Likely cause: Drive gear not fully engaged with torsion shaft, or spring is broken
Fix: Check that the drive gear is fully seated on the shaft. If the spring is broken, the opener cannot lift the door — call for spring replacement before attempting further operation.
Door opens but will not close
Likely cause: Photo-eye misalignment or obstruction
Fix: Check photo-eye alignment and clean the lenses. The indicator light on the receiving eye should be solid.
myQ app shows opener as offline
Likely cause: Wi-Fi signal weak at the wall-mount location or router change
Fix: Wall-mount openers are often further from the router than ceiling-mount units. Add a Wi-Fi extender if signal is weak. Reset Wi-Fi and re-pair if the router was changed.
Door moves unevenly or jerks during operation
Likely cause: Torsion spring tension imbalance or worn drive gear
Fix: Disconnect the opener and manually test the door balance. If the door does not stay at mid-travel, the spring tension needs adjustment. Call a technician — do not adjust torsion springs yourself.
Battery backup light is amber or red
Likely cause: Battery is charging (amber) or has failed (red)
Fix: Amber is normal after a power outage — the battery is recharging. A solid red light indicates battery failure. Replace with a Chamberlain 4228 battery.
Chamberlain RJO101 Installation Cost in Surrey
Prices current as of October 2026. Final quote provided after on-site assessment.
Chamberlain RJO101 FAQs
No. The RJO101 is a jackshaft opener that drives the torsion spring shaft directly. It requires a torsion spring system. If your door has extension springs, Surrey Doors Ltd. can convert it to torsion before installing the RJO101.
As little as 2 inches above the top of the door. This makes it the best choice for garages where a standard ceiling-mount opener cannot be installed due to low headroom or obstructions.
They are very similar products from the same parent company (Chamberlain Group). The RJO101 is the Chamberlain-branded version; the 8500W is the LiftMaster-branded equivalent. Both use the same myQ platform and have similar specifications.
The RJO101 is compatible with Security+ 2.0 remotes and keypads. If your existing remotes use the older Security+ protocol, they will need to be replaced. We can confirm compatibility during the installation quote.
Yes. We install and service the Chamberlain RJO101 throughout Surrey, including Guildford, Fleetwood, Newton, Whalley, South Surrey, and White Rock.
Ready to Install the Chamberlain RJO101 in Your Surrey Garage?
Call Surrey Doors Ltd. for a same-day quote. We supply and install the RJO101 throughout Surrey and the Lower Mainland.